Client: Envita for Large Noodle Manufacture, who’s name is confidential
Location: South Korea
Background: Emissions from eight noodle ovens were causing visible emissions and also oil/grease coating on the roof around the exhaust stacks. Air Clear looked at comparison of two technologies. Regenerative Thermal Oxidizer (RTO) and Fiberbed Mist Collector. The cost advantage was clearly in favor of the Mist Collector, however the end user wanted to see performance as this was the first application of the Mist Collector on a noodle manufacture. The three month Pilot Test demonstrated that the Mist Collector removed greater than 99% of all oil aerosol particulate greater than 0.1 micron and larger.
Waste Description: Oil and grease aerosol mist from hot peanut, coconut and vegetable oils.
Solution: Air Clear installed 530 3欧美色图库/minute (18,500 ACFM) Fiberbed Filter Mist Collector System to remove the submicron particulate that was causing the opacity ‘smoke’ problem. To protect against solid particulate and to protect the unit from duct fires a cyclonic water scrubber was used to remove the solids and to provide a water seal which would serve as a fire block in case of a duct fire. In addition to greatly reducing odors, the Air Clear Fiberbed Filter Mist Collector provided zero visible emissions.
A steam pipe was connected to the shell of the unit to heat the coalescing filters and restore the pressure drop. This allowed the filters to last for several years.
Process Equipment: Eight oven stacks were duct together creating one inlet duct to the Mist Collector. Any number of units, one to eight, can exhaust to
欧美色图库the Mist Collector by using isolation dampers on each line. A VFD was also used to control the flow from the ovens to the Mist Collector.